Removing the EASY DISMOUNTING suction unit
• Disconnect Hood.
• Remove grease Filters from Hood.
• Disconnect power connector Ca.
• Disconnect the earth cable from the Cooker hood.
• Hold the Unit with one hand and rotate the Suction Unit lock-
ing levers Lb by unhooking them from their pins.
• Pull Suction Unit forward so that it slides free from the support
pins and remove downwards from the air outlet.
• Use a wet cloth and some detergent to clean the Suction Unit
Body; take great care not to put water inside the Unit or in the
Connector housing.
• Use a brush to clean the air outlet as far as you can reach.
• Dry well before refitting.
• Replace all in inverse sequence.
To Next Page
Loading...
