Fabtech FTS8002 User Manual

Installation Instructions
99-05 GM K1500 Steering Stabilizer Kit
FTS8002/ FTS8034
PARTS LIST-
FTS8002 Steering Stabilizer 99-UP GM
FT204
13 Hdwr Sub-Assembly Kit
Qua
Part # Description
Qua Part # Description
1 FT204
13 Hdwr Sub-Assembly
2 FT8002i Instruction Sheet
1
FT8002-1 Steering Frame Bracket
2 FTS31UBK U-Bolt Kit
1 FTS7002
Steering Stabilizer
1
FTT31 Steering Stabilizer Bracket
TOOL LIST:
• Assorted Metric & S. A. E. Wrenches & Sockets
• TORQUE WRENCH
READ
ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING
INSTALLATION! IF THESE INSTRUCTIONS ARE NOT PROPERLY FOLLOWED, SEVERE FRAME,
DRIVELINE AND / OR SUSPENSION DAMAGE MAY RESULT.
CHECK FOR FRAME AND SUSPENSION DAMAGE PRIOR TO INSTALLTION. THIS KIT DOES NOT
REQUIRE WELDING FOR INSTALLATION. DO NOT WELD ANY OF THESE COMPONENTS.
THE INSTALLTION OF THIS KIT SHOULD BE PERFORMED BY A PROFESSIONAL MECHANIC.
THIS STABILIZER KIT WILL NOT WORK ON STOCK HEIGHT VEHICLES
IT IS DESIGNED TO WORK ONLY
ON VE
HICLES WITH FABTECH LIFT SYSTEMS
FTS8034 Steering Stabilizer 99-UP GM
Qua
Part # Description
1 FT204
13 Hdwr Sub-Assembly
1 FT8002-1 Steering Frame Bracket
1 FTS6602 Steering Stabilizer
1
FTT31 Steering Stabilizer Bracket

Fabtech FTS8002 Specifications

General

Brand	Fabtech
Model	FTS8002
Category	Automobile Accessories
Language	English

Summary

Steering Stabilizer Kit Parts List

Required Tools for Installation

Installation Procedure

Disconnect Battery and Position Vehicle

Disconnect the negative battery terminal and align front tires straight ahead for installation.

Attach Frame Bracket

Mount the L-shaped Fabtech bracket to the passenger side lower control arm pivot bolt using the stock nut.

Attach Centerlink Bracket

Secure the five-hole L-shaped bracket to the centerlink with provided U-bolts, nuts, and washers.

Connect Steering Stabilizer

Attach stabilizer shaft end to frame bracket and centerlink bracket using bushings and nuts.

Final Checks and Adjustments

Recheck torque on all fasteners and adjust centerlink bracket for proper turning radius.