www.seagullmodels.com
19
2pcs.
ATTACHMENT WING (LOWER WING).
1
INSTALLING THE CANOPY HATCH.
1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
INSTALLING THE RECEIVER.
Receiver.
Wing bolts.
20 pcs.
M3 x10mm.
To Next Page
Loading...