Factory CHRISTEN EAGLE II - Page 5

www.seagullmodels.com
5
M3x10mm.
UPPER MAIN WING( LOW SIZE).
M3x10mm.
M3x10mm.
Aileron control horn installation: See pictures
below.
AILERON CONTROL HORN
M3 LOCK
NUT.
ALUMINUM WASHER.
ALUMINUM WASHER.
CONTROL HORN
M3 SCREW.
Epoxy.
Epoxy.
ELEVATOR CONTROL HORN.
Install the elevator control horn using the
same method as with the aileron control
horns.
2 sets.
3x35mm.
4 pcs.
18mm.
Wing
bottom.
Aileron
control horn.
2 sets.
3x40mm.