EnglishEnglish
☛
☛
☛
☛
☛
☛
☛
☛
2. Programming
clock setup
monday 07:00
Change using the “+” (72) and “-“ (73) keys.
Use key
(71) to move the cursor (the display flashes) on the
hour or minute value desired.
Change using the “+” (72) and “-“ (73) keys.
Use the
(71) key to move the cursor on the minutes, the hour
(duration and minutes (duration).
Using the PROG (35) key, the other days of the week can be pro-
grammed (Tues., Wed.,…,Sun.).
start period
00:00 mon 24:00
no. coffee: 000347
reset press >>>
Use the
(71) key pressed for a few seconds to reset the
counter.
no. water: 001452
reset press >>>
Use the
(71) key pressed for a few seconds to reset the
counter.
no. milk: 002557
reset press >>>
Use the
(71) key pressed for a few seconds to reset the
counter.
Use the
(71) key pressed for a few seconds to reset the
counter.
total cycle: 134643
reset press >>>
cycle counter
12345678
Not resettable, read-only.
Cheks the correct functioning of each component with the display of
the name of the component activated:
“hot water solenoid valve” press the hot water delivery key (51.1).
“cappuccino solenoid valve” press the milk delivery key (42).
“x group solenoid valve” press the coffee delivery key (36) of
each distributor group.
“pump” press the coffee delivery key (37) of the group on the right.
“auto-level solenoid valve” press the coffee delivery key (38) of
the group on the right.
components test
water mixer
yes
“Yes” activates, “no” deactivates the mixer function. To select
“yes” or “no” use the “+” (72) and “-“ (73) keys.
☛
To Next Page
Loading...
