EasyManua.ls Logo

Faema Enova A User Manual

Faema Enova  A
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USO E INSTALLAZIONE
USE AND INSTALLATION
UTILISATION ET INSTALLATION
GEBRAUCH UND INSTALLATION
USO E INSTALACIÓN
USO E INSTALAÇÃO
Enova A
Code 915-202-060 (rev. 1745)
Question and Answer IconNeed help?

Do you have a question about the Faema Enova A and is the answer not in the manual?

Faema Enova A Specifications

General IconGeneral
BrandFaema
ModelEnova A
CategoryCoffee Maker
LanguageEnglish

Summary

General Safety and Usage Rules

Installation Procedures

Electrical Installation Requirements

Water Supply and Connection Rules

Post-Installation Checks

Water Connections Check

Verify for leaks from water connections or tubes during the installation check.

Functioning Check

Check boiler/operating pressures, pressure gauge, self-leveling, and expansion valves.

Pre-use Wash Cycle

Wash internal components before first use by dispensing water through groups, hot water, and steam.

Operator Guidelines

Pre-Operation Machine Preparation

Wash internal components by dispensing water, hot water, and steam before starting operation.

On-the-Job Procedures

Includes steam/coffee dispensing, hot water dispensing, and cleaning coffee circuits during operation.

Safety Warnings and Precautions

Danger of Burns and General Safety

Warnings about hot surfaces, handling, and general disclaimers for improper use.

Machine Close-Down Procedure

Steps for safely shutting down the machine for extended periods, including unplugging and closing water tap.

Maintenance and Repair Information

Dismantling and Disposal

Daily Operation and Use

Daily Machine Operation

Steps for turning the machine on, heating, and turning it off at the end of the day.

Cup Warmer Usage

Instructions for placing cups on the warming plate and activating the warming function.

Machine Heating Process

Describes the machine heating process and readiness for dispensing coffee, steam, and hot water.

Coffee Dispensing Process

Guide to preparing filter holders and dispensing coffee using various buttons.

Steam Dispensing Procedure

Instructions for dispensing steam, heating liquids, and cleaning steam nozzles.

Hot Water Dispensing Procedure

Procedures for dispensing hot water in both dosed and continuous modes.

Accessing Programming Mode

Steps to enter and exit the machine's programming mode using specific buttons.

Programming Coffee Doses

How to set specific coffee dispensing volumes for different buttons.

Programming Hot Water Doses

Procedure to set specific hot water dispensing volumes using the hot water lever or key.

Daily Cleaning and Maintenance

Detailed daily cleaning procedures for dispensing units and filter-holders.

Dispensing Unit Cleaning

Daily cleaning steps for coffee groups, including backflushing with detergent.

Filter Holder Cleaning

Daily cleaning process for filter-holders, involving soaking and rinsing.

Steam and Hot Water Pipe Cleaning

Grille and Drip Basin Cleaning

Discharge Basin Cleaning

Machine Bodywork Cleaning

Troubleshooting Guide

Related product manuals