Need help?Do you have a question about the Faema President GTi and is the answer not in the manual?
Detailed instructions for using the steam lever for various dispensing functions.
Setting automatic switch-on/off times, day off, and energy saving modes.
How to change the machine's display language for user interface.
Accessing and viewing usage counters for coffee, water, and steam.
Adjusting volumetric dispensing parameters like dose, pre-infusion, and blooming time.
Configuring water dispensing time and temperature using the self-learning function.
Managing energy saving modes for reduced power consumption.
Initiating and managing wash cycles for machine cleaning and maintenance.
Adjusting cup warmer heating levels for optimal cup temperature.
Setting and adjusting the coffee boiler temperature.
Steps for performing the daily water change in the boiler.
Procedures for cleaning the coffee circuit, including sequential, simultaneous, and single washing.
Steps for changing boiler water and cleaning filter holders for optimal performance.
Procedures for cleaning steam nozzles, grille, drip basin, draining tray, and bodywork.
Explains common error messages and their corresponding causes and solutions.
Guidance on resin regeneration and water filter replacement procedures.
General| Boiler Material | Copper |
|---|---|
| Number of Groups | 2 or 3 |
| Voltage | 220-240 V |
| Weight | 74 kg (2 groups) / 94 kg (3 groups) |
| Group Head | E61 |
| Boiler Type | Heat Exchange |
| Water Source | Plumbed |
| Group Heads | 2 or 3 |
| Pump Pressure | 9 bar |
| Programmable Buttons | Yes |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Cup Warmer | Yes |
| Material | Stainless Steel |
| Water Supply | Plumbed |
To Next Page
