Assembly
Thread the right pedal onto the right crank gently by hand,
turning clockwise. Then ghten pedal by allen wrench.
Locate the right-side/ le side pedal, which is
marked “R,” “L,”should have an “R”“L,” scker
aached.
Thread the le pedal onto the le crank gently by
hand, turning counter-clockwise. Then ghten pedal
by allen wrench.
Check the chain alignment. Rotate the right pedal and
crank toward the back of the bike as though pedaling
backward. Watch the chain and ensure the chain runs
through the drivetrain (the rear cog, chain tensioner, and
around the front chainring) smoothly.
9
To Next Page
Loading...
