Fagor 20i-T Installation & Operation Manual

(14/32) - DRO operation - Installation/Operation - 20i-T / 30i-T - V0612
2.5.5.2 Recall and Reset modes
Toggles between the recall and Preset modes.
RECALL mode The recall mode lets enter the current axis position into the calculator.
Enters the current position of the selected axis into the calculator. The [Z] key
for the Z
1
axis and the [Zs] key for the Z
2
axis.
PRESET mode The preset mode lets preset the desired axis with the result of an operation.
Presets the selected axis with the result of the calculation. The [Z] key for the
Z
1
axis and the [Zs] key for the Z
2
axis.
Example Calculate [Z
1
position] / 5 and preset the Z axis with the result.
Example: calculator
Display keys Operation Display
X = 25
Z = 10
Goes into calculator mode X = 0
Z = 0
Z
s
= Ad
X = 0
Z = 0
Z
s
= Ad
Goes into RECALL mode
and enters the current
position in the Z axis.
X = 10
Z = 0
Z
s
= Ad
X = 10
Z = 0
Z
s
= Ad
Presets the divisor (5) X = 10
Z = 5
Z
s
= Ad
X = 10
Z = 0
Z
s
= Ad
Selects the divide operation X = 10
Z = 5
Z
s
= di
X = 10
Z = 5
Z
s
= di
Result in the X display (2) X = 2
Z =
Z
s
= di
X = 2
Z =
Z
s
= di
Goes into Preset mode X = 2
Z = Preset
Z
s
=
X = 2
Z = Preset
Z =
Presets the Z
1
axis with the
result of the calculation.
X = 25
Z = 2
Z
s
= di
X = 25
Z = 2
Z
s
= di
Quits the calculator mode. X = 25
Z = 2
Z
s
=
5
3 times
All manuals and user guides at all-guides.com

Fagor 20i-T Specifications

General

Brand	Fagor
Model	20i-T
Category	Monitor
Language	English