6
a) When supplied with electricity
- CLOCK:
• The digital display flashes.
• Set the time by pressing on the and touch
controls to adjust the clock (the digital display is no
longer flashing).
• Press the “ ” touch control to enter.
Example: 3:30.
- DIGITAL DISPLAY (used for
programming):
After a few seconds, the digital display starts flashing
again.
Set the time the same as for the clock by pressing on
the + and - touch controls to increase or decrease
the displayed time.
• Confirm the time by pressing the “ ” touch
control.
When the time is set, the digital display turns off.
b) Resetting the clock
• Simultaneously press the and touch controls
for a few seconds until the digital display flashes.
The time display flashes, indicating that it is now
possible to adjust the time.
To set the time, press the or touch controls
to advance or turn back the displayed time.
• Confirm the time by pressing the “ ” touch control.
2. How do you set the clock on the oven?
How does your oven work?
If you do not confirm the time by pressing the “ ” touch control,
the oven will do it automatically after a few seconds.
To Next Page
Loading...
