NEW FEATURES
AND
MODIFICATIONS
Date: February 1991 Software version: 2.1 and newer
FEATURE MODIFIED MANUAL AND SECTION
Error 65 is not issued while probing (G75) Installation Manual Section 3.3.4
It is possible to select the home searching Installation Manual Section 4.6
direction for each axis
New 1, 2, 5, 10 resolution values for Installation Manual Section 4.1
sine-wave feedback signals of each axis
PLCI register access from the CNC Programming Manual G52
Sheetmetal tracing on laser machines Applications Manual
Jig Grinder Applications Manual
Date: June 1991 Software version: 3.1 and newer
FEATURE MODIFIED MANUAL AND SECTION
Repetitive emergency subroutine Installation Manual Section 3.3.8
New function F29. It takes the value of the Programming Manual Chapter 13
selected tool
Function M06 does not execute M19 Installation Manual Section 3.3.5
Greater speed when executing several
parametric blocks in a row.
To Next Page
Loading...
