Date: March 1992 Software version: 4.1 and newer
FEATURE MODIFIED MANUAL AND SECTION
Bell-shape acceleration/deceleration control Installation Manual Section 4.7
Expansion of cross compensation Installation Manual Section 4.10
Rigid Tapping G84 R Programming Manual G84
Possibility to enter the sign of the leadscrew Installation Manual Section 4.9
backlash for each axis
Independent execution of an axis Programming Manual G65
Date: July 1993 Software version: 5.1 and newer
FEATURE MODIFIED MANUAL AND SECTION
Double cross compensation Installation Manual Section 4.10
Linear and bell-shaped acc./dec. ramp Installation Manual Section 4.7
combination for the axes
Acceleration/deceleration control for the Installation Manual Section 5.
the spindle
Multiple arc pattern machining Programming Manual G64
Tool tip position display Installation Manual Section 3.3.5
The associated subroutine is executed before Installation Manual Section 3.3.5
the T function
The additional circular sections of a Installation Manual Section 3.3.8
compensated path are executed in G05 or G07
VGA monitor 8030 CNC. Installation Manual Chapter 1
To Next Page
Loading...
