Work modes
40
User tables
Softkey Meaning
Description of the softkeys from the user tables.
Change the units for data display (mm or inches). For
programming, the CNC assumes the units defined with
the active function G70 or G71, or, when not
programmed, the units set by the machine
manufacturer (INCHES parameter).
Initialize the table. Reset all the table data to "0".
Search a text or a value in the table.
Accessing the tables of other channels. With some
tables, only the data of the active channel are displayed,
this softkey is used to show the tables of the other
channels. This softkey will only be available when using
channels.
Select the axes to be displayed in the tables. When
using several channels, only those axes assigned to the
active channel may be accessed.
Save the values of the table into a file.
Restore the values of the table previously saved into a
file.
Print the table in the pre-determined printer or save it as
a file (prn format) at the CNC.
To Next Page
Loading...
