Need help?Do you have a question about the Fagor 8035-T and is the answer not in the manual?
General| Brand | Fagor |
|---|---|
| Model | 8035-T |
| Category | Control Systems |
| Language | English |
Overview of the rear CNC connectors, including power supply, ground, USB, operator panel, and communication interfaces.
Importance and methods for proper ground connection to ensure electrical safety and reduce interference.
Steps for setting up the CNC, including electrical checks, precautions, and connection procedures.
Procedure for adjusting the home position for each axis, including parameter settings and example calculations.
Wiring and logic for the CNC's emergency input (I1) and output (O1) for safety system integration.
Lists machine parameters modifiable via oscilloscope or OEM program, and associated variables.
Parameters for configuring axes, handwheels, and spindles, including detailed explanations of each parameter.
Parameters related to axis configuration, types, limits, feedback, and compensation.
Parameters for configuring spindle operation, including speed control, gear changes, and closed-loop operation.
Parameters for configuring digital servo drives connected via CAN, including softkeys and access levels.
Details on tables for M functions, leadscrew error compensation, and cross compensation.
Description of handwheel types and operating modes: standard, path, and feed handwheel modes.
Categories of action instructions: Assignment Binary, Conditioned Binary, Sequence Breaking, Arithmetic, Logic, and Specific.
Details on general logic inputs like /EMERGEN, /STOP, /FEEDHOL, /XFERINH, CYSTART, SBLOCK, MANRAPID, OVRCAN, LATCHM, ACTGAIN2, RESETIN, AUXEND.
Logic inputs related to axis control, including limit switches, deceleration signals, inhibit signals, and mirror image.
Logic inputs for spindle control, including limit switches, direction, speed selection, and servo status.
Variables related to tool offset, tool table, and tool magazine tables for mill and lathe models.
Variables for accessing and modifying zero offset tables, including active, additive, and programmed offsets.
Read-only variables providing access to general, axis, and spindle machine parameters.
Variables for accessing real, theoretical, and selected feedrates, including override percentages.
Variables for real and theoretical spindle speed, speed limits, and override percentages.
Comprehensive list of internal CNC variables related to tools, zero offsets, machine parameters, feedrates, coordinates, handwheels, feedback, and spindle.
Reference guide to PLC commands, including resources, directing instructions, consulting instructions, operators, and action instructions.
To Next Page
