Fagor 8035-T User Manual

 Installation manual
CNC 8035
ACCESS TO INTERNAL CNC VARIABLES
Operating-mode related variables
11.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·387·
11.11 Operating-mode related variables
Read-only variables related to the standard mode
OPMODE
It returns the code corresponding to the selected operating mode.
0 = Main menu.
10 = Automatic execution.
11 = Single block execution.
12 = MDI in EXECUTION.
13 = Tool inspection.
14 = Repositioning.
15 = Block search executing G.
16 = Block search executing G, M, S, T.
20 = Theoretical path simulation.
21 = G function simulation.
22 = G, M, S and T function simulation.
23 = Simulation with movement in the main plane.
24 = Simulation with rapid movement.
25 = Rapid simulation with S=0.
30 = Normal editing.
31 = User editing.
32 = TEACH-IN editing.
33 = Interactive editor.
40 = Movement in continuous JOG.
41 = Movement in incremental JOG.
42 = Movement with electronic handwheel.
43 = HOME search in JOG.
44 = Position preset in JOG.
45 = Tool calibration.
46 = MDI in JOG.
47 = User JOG operation.
50 = Zero offset table.
51 = Tool offset table.
52 = Tool table.
53 = Tool magazine table.
54 = Global parameter table.
55 = Local parameter table.
56 = User parameter table.
57 = OEM parameter table.
60 = Utilities.
70 = DNC status.

Fagor 8035-T Specifications

General

Brand	Fagor
Model	8035-T
Category	Control Systems
Language	English