Need help?Do you have a question about the Fagor CNC 8055 TC and is the answer not in the manual?
General| Control Type | CNC |
|---|---|
| Model | 8055 TC |
| Manufacturer | Fagor |
| Resolution | 640 x 480 pixels |
| Axis Control | Yes |
| Simultaneous Axes | 4 |
| Spindle Control | Yes |
| Spindles | 2 |
| Channels | 1 |
| Interpolation | Linear, circular, helical |
| User Interface | Graphical |
| Program Storage | Hard Disk |
| PLC | Integrated |
| Power Supply | 24 VDC |
| Display Type | Color TFT |
| Programming Language | ISO |
| Communication Ports | RS-232, Ethernet |
Explains the X and Z axes of the machine, defining their orientation and function.
Defines machine reference (OM) and part zero (OP) for axis positioning and programming.
Procedure for re-synchronizing axis positions, typically after power loss.
Method for establishing the part's origin point (OP) for accurate programming.
Covers manual and automatic tool changing procedures on the machine turret.
Details data stored for each tool, including number, offset, and geometry.
Explains the process of defining tool dimensions for accurate machining.
Guides on performing automatic or manual axis homing.
Instructions for manual axis movement using jog keys or handwheels.
Procedures for tool changes, calibration, and data management.
Step-by-step guide for calibrating tools on the machine.
Guide to defining and modifying parameters for machining cycles.
How to preview tool paths and operations before execution.
To Next Page
