ISO language
46
Technological functions
Function Meaning
F
Machining feedrate.
The machining feedrate may be selected by
programmed using the "F" code which remains active
until another value is programmed. The programming
units depend on the active work mode (G93, G94 or
G95) and the type of axis being moved (linear or rotary).
S
Spindle speed.
The spindle speed is selected by program using the
spindle name followed by the desired speed. The
speeds of all the spindles of the channel may be
programmed in the same block. The programmed
speed stays active until another value is programmed.
The programming units will be rpm unless selected
otherwise. If G96 is active, the programming units will
be m/min.
T
Tool number.
The "T" code identifies the tool to be selected. The tools
may be in a magazine managed by the CNC or in a
manual magazine (referred to as ground tools).
D
Tool offset number.
The tool offset contains the tool dimensions. Each tool
may have several offsets associated with it. To activate
an offset, it must be previously defined. To do that, the
CNC offers a section of the tool table where several
offsets may be defined.
[..]
Optional parameters.
The parameters indicated between angular brackets
are optional.
To Next Page
Loading...
