ISO canned cycles (T)
99
G162
* Slot milling canned cycle along the side of
the part.
G162 X Z L I Q A J [D] F S N
X: X coordinate of the cycle starting point
Z: Z coordinate of the cycle starting point
L: Length of the slot referred to the starting point
I: Depth of the slot referred to the starting point
Q: Angular position of the spindle for the first
machining operation
A: Angular increment between machining
operations
J: Total number of machining operations
D: Safety distance along X
F: Machining feedrate
S: Live tool turning speed and direction. The sign
defines the turning direction.
N: Number of the spindle for the live tool
Function MDVMeaning
To Next Page
Loading...
