Fagor CNC 8065 Users Quick Reference

Screen and keys
12
The shortcuts for the [START] [STOP] and [RESET] keys are only
available when the CNC is installed as simulator on a PC.
Work modes.
[CTRL] + [A]
To show the task window.
[CTRL] + [SHIFT] + [F1]
Main menu.
[CTRL] + [F6]
Automatic mode.
[CTRL] + [F7]
Manual mode.
[CTRL] + [F9]
EDISIMU mode, in other words editing and simulation.
[CTRL] + [F8]
MDI/MDA mode.
[CTRL] + [F10]
User tables.
[CTRL] + [F11]
Tool and magazine table.
[CTRL] + [F12]
Utilities mode.
[CTRL] + [K]
Calculator.
Execution keys.
[CTRL]+[S]
Cycle start key [START].
[CTRL]+[P]
Cycle stop key [STOP].
[CTRL]+[R]
Reset key.
[CTRL]+[B]
Single block execution mode.

Fagor CNC 8065 Specifications

General

Brand	Fagor
Model	CNC 8065
Category	Control Systems
Language	English