High level language
158
Programming instructions
Instruction Meaning
#ABORT
Abort the execution of the program and
resume it in another block or program.
#ACS
Fixture coordinate system.
#ANGAX OFF
Turn angular transformation off.
#ANGAX ON
Turn angular transformation on.
#ANGAX SUSP
Freeze angular transformation.
#ASPLINE
ENDTANG
Akima splines. Type of final tangent.
#ASPLINE
MODE
Akima splines. Selection of tangent type.
#ASPLINE
STARTTANG
Akima splines. Type of starting tangent.
#AXIS
Axis upon which the additive manual
intervention is applied.
#CALL AX
Add a new axis to the configuration of the
channel.
#CALL SP
Add a spindle to the configuration of the
channel.
#CAM ON
Activate the electronic cam (real
coordinates).
#CAM OFF
Cancel the electronic cam.
#CAX
Axis C. Activating the spindle as C axis.
#CD OFF
Cancel collision detection.
#CD ON
Activating collision detection.
#CLEAR
Channels. It clears the synchronism marks of
the channel.
#CLOSE
Close a file already created or opened using
the instruction #OPEN.
#CONTJOG
Manual intervention. Feedrate in continuous
jog.
#COMMENT
BEGIN
Beginning of comment.
#COMMENT
END
End of comment.
#CS
Machining coordinate system.
#CSROT ON
Activate tool orientation in the part coordinate
system.
To Next Page
Loading...
