Fagor CNC 8065 - Page 16

Work modes
16
Move the axes
JOG keypad.
Select an axis and move it in the positive direction.
Select an axis and move it in the negative direction.
Keys to select the axes and keys to select the jogging
direction. Both keys (axis and direction) must be
pressed to jog the axis.
Move the axis in rapid.
Jogging.
Movement in continuous jog.
In continuous jog, the axes keep
moving while the jog keyboard is
acted upon.
1. Turn the jog selector switch to the continuous JOG
position.
2. In incremental mode, it selects the incremental value
of the axis movements.
Movement in incremental jog.
In incremental jog, the axis moves
a specific distance every time the
key is pressed.
1. Turn the jog selector switch to one of the incremental
jog positions.
2. Jog the desired axis using the JOG panel (keypad).
Every time the JOG panel is acted upon, the axis will
move the distance indicated on the dial of the jog
selector switch.
10000
1000
100
10
1
100
10
1
jog
10000
1000
100
10
1
100
10
1
jog
jog