Work modes
39
Simulation options.
Radius compensation.
Activate or cancel tool radius compensation to simulate
the program.
Block skip.
Option to simulate the external "block skip" switch.
Being this option active, the CNC does not simulate the
blocks containing the block-skip character "/".
Synchronizing spindles.
There is an icon for each spindle where to indicate the
spindle to synchronize with. The ·0· value cancels the
synchronization.
Assume the active origins for execution.
When starting the simulation or pressing the simulation
reset, the CNC applies to the simulation the origins set
in the execution environment (for example, the part zero
set in jog mode).
Software limits.
Activate or deactivate the software limits for program
simulation.
Conditional stop during simulation.
Option to simulate the external "conditional stop"
switch. Being this option active, the CNC interrupts the
simulation in the blocks where the “M01" function is
programmed.
Cancel channel synchronization.
There is one icon per channel that cancels the wait for
synchronism with the channel during simulation.
To Next Page
Loading...
