This manual can be used for the PC simulator and the
CNC8060/65. The keys included in this manual may vary
depending on whether there is a CNC or a simulator. They can
also vary depending on the available CNC model.
This manual has been updated for versions up to V05.7x / V01.7x.
Simulator
The CNC simulator provides the user with a complete tool to
create, optimize and check programs directly at the PC. He can
then transfer them directly on the machine and run them which
means working faster.
If the simulator is configured with the same software version
and the same configuration of the real machine (dynamics,
functions M, G, etc.), it reproduces the exact behavior of the
machine.
To Next Page
Loading...
Need help?
General
