ISO language
59
G151
* * * Programming the face axis in diameter.
G151
Note: with axes configured using machine
parameter DIAMPROG=YES.
G152
* Programming the face axis in radius.
G152
Note: with axes configured using machine
parameter DIAMPROG=YES.
G157
* * Excluding axes in the absolute zero
offset.
See:
G158
G157 X ~ W
X
~W: axes where the zero offset is not
applicable
Example: G157 Y
G55 (the second zero offset is
applicable, except on the Y axis, which
retains the previous movement)
G158
* * Zero offset. Incremental zero offset.
G158 X...Y...Z...A...B...C...U...V...W...
X...
~ W...: value o f ze r o off set . It i s ann ulle d by
only programming G158.
G159
! * Zero offset. Absolute zero offset.
See:
G54-G59
G159=...
...: number of the zero offset to be activated
(from 1 to 99)
G170
* Cancel Hirth axes.
G170 A...B...C...
A...B...C...: Hirth axis to deactivate and
deactivation order number
Example: G170 A1 B2: first deactivate axis A and
then axis B
Function M D V Meaning
To Next Page
Loading...
