Keep press “Pulse” button by hand, appliance can reach to maximum 12 speeds in seconds, until loosen exit
working mode, recover former status. If temperature ≧
60℃, press the button is no
Programme button
Press this button you can select the automatic program you want.
32 kinds of programs:
Turbo button
Keep press “Turbo” button by hand, appliance can reach to maximum 12 speeds in seconds, until loosen exit
working mode, recover former status. If temperature ≧
60℃, press the button is no
Start/Stop/Reset Knob
Rotate Start/Stop/Reset knob can adjust ‘Temperature’ ‘Timer’ ‘Speed’ when you press Temperature Timer
Speed button,clockwise rotation is “+”, contra rotate is “–“
After you set the working instruction press this button appliance will work, press it again appliance will stop or
pause.
Press it for 2 seconds appliance will reset all of the data that you setting.
Safety protection under the high temperature
When then actual temperature ≧60℃ and the speed ﹥5 level, appliance will arrive the target speed slowly and
the heating will be closed .
Prompt function:
When appliance automatically stopped “Beep” sound 30 seconds.
LCD Display
Time display:
If setting time, the LCD Time is down counting (…5 4 3 2 1) display;
If not setting time, the LCD Time is counting (1 2 3 4 5…) display.
Actual temperature display:
To Next Page
Loading...
