3.Please don't use the blade cover if stirring the liquid foods.
Fault code:
Code Explanation Solution
E01
When machine heating the temperature detector open
circuit ，or meaning the NTC open circuit.
Maintenance department to repair
E02 Machine failures Return to seller and repair
2. The bowl does not install on the unit.
2. bowl lid does not install
3. or bowl lid was installed incorrectly
Turn off the machine, install the
bowl, or cover the lid, or take out
the bowl lid and reinstall it
correctly according to the IM,
reset the machine.
E04
1. The ingredients is too more or the speed is too low
lead to motor cannot running.
2.The machine motor have high temperature protect,
after the machine working long time cause motor’s
temperature too high lead to motor cannot running.
1. Reduce some ingredients or set
2. Stop working few minutes.
E05 Dry burning
Turn off the machine and let the
appliance cool down then restart
it.
To Next Page
