Need help?Do you have a question about the Fairland Rapid IPHCR33 and is the answer not in the manual?
General| Model | IPHCR33 |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 33 kW |
| Max Power Input | 9.8 kW |
| Noise Level | 58 dB(A) |
| Refrigerant | R410A |
| Power Supply | 380-415V/3Ph/50Hz |
Details crucial safety advice: avoiding obstacles, flammable materials, and electrical hazards.
Explains how to use the heat pump controls, including power, mode selection, and temperature adjustment.
Steps for physically mounting the heat pump, managing condensation, and connecting water pumps.
Instructions for connecting power supply, grounding, and selecting appropriate protection devices.
Step-by-step instructions for connecting the power wire to the electrical box.
Schematics for connecting the heat pump to power supplies (230V and 400V).
Table listing common failure scenarios, their reasons, and recommended solutions.
Detailed wiring diagram for heating priority with a 230V, ≤500W water pump.
Detailed wiring diagram for heating priority with a 230V, >500W water pump.
Detailed wiring diagram for heating priority with a 400V water pump.
To Next Page
