Before use
34
Before use
Assembly
WARNING!
Prior to assembly, make sure that the mains plug is unplugged.
If the mains plug is plugged in, the appliance could accidentally
be switched on, resulting in injuries.
• Unpack the appliance and remove the accessories.
• Release both canister clips (fig. 1).
• Remove motor head from the canister by means of the carry-
ing handle.
• Take off the textile filter.
• Remove contents from the canister.
• Pull the reinforced opening of the dust bag over the connec-
tion socket and fasten it by turning it slightly (fig. 3).
• Reinsert the textile filter.
• Reinstall motor head and fasten the retaining clips.
• Push the end of the suction hose into the suction socket of
the canister as far as it will go. For release of the suction
hose press button (fig. 4).
• Place on the required nozzle.
To Next Page
Loading...
