Fakir NT 21 - Blower Function; After Vacuuming Steps

Operating
38
Blower function
• Open the exhaust air grid and remove the H.E.P.A. filter.
• Remove the end of the suction hose from the suction socket
of the canister by pressing the button.
• Insert the end of the suction hose into the exhaust air open-
ing below the H.E.P.A. filter as far as it will go.
• Switch on the appliance by lightly pressing the ON/OFF
switch.
• Now you can blow the exhaust air out of the suction hose
and e.g. remove the leaves from the terrace or balcony.
• In reverse order you can go back to suction function.
After vacuuming
WARNING!
Carry out the following steps as soon as you stop vacuuming.
Never leave the appliance unattended.
• Press the ON/OFF switch to switch off the appliance.
• Remove the plug from the mains socket.
• Wind the power cord around the cable holder of the appli-
ance.