Assembly
29
Put the master device on a desktop, with the bottom reaching out, unscrew the cover fixer,
as Picture Ⅰ showed.
Connect the base with the cover fixer, tie the base，as Picture Ⅰ showed.
Erect the device, put it an even and stable surface.
Pull out the battery door at the back side of remote control (see Picture Ⅲ)
Pay attention to the battery polarity, and insert the battery to the tray of the door
(see Picture IV )
Push the battery door into the remote control.
Assembling
ATTENTION!
Disused batteries and accumulators (rechargeable batteries) contain useful materials but
they also contain harmful substances which are necessary for function and safety of the ap-
pliances. Disposing them into the domestic waste or wrong handling may be dangerous to
human health and may pollute the environment. Do not dispose the battery at the end of its
life with the household refuse. Batteries must be disposed separately! Use the collection
point in your locality for the disposal of the batteries. If the device is not needed over a lon-
ger period of time, the batteries should be removed to prevent leakage.
Infrared remote controll
TH-2000-IM-TR-ENG_Layout 10mm Ränder 7/13/12 1:32 PM Page 29
To Next Page
Loading...
