Kapitel R
37
Troubleshooting
Fault Possible cause Solution
Device does not
heat.
Plug is not plugged. Connector plug.
Device is not turned on.
Switch on the unit with heating
stages.
The socket does not have
electricity.
Try a different outlet.
Power cord is damaged.
Switch off the mains plug. Report
and remove errors in service hot-
line.
Thermostat is set too low. Higher temperature.
No heat setting selected. Turn heat setting.
Fan is not run-
ning.
Thermostat is set too low.
Thermostat to max. setting is
reached.
Appliance heats
up slightly.
One or both heaters on low
power.
One or both heaters off at high
speed.
Overheating. Device is defective.
Switch off the mains plug. Report
and remove errors in service hot-
line.
TH-2000-IM-TR-ENG_Layout 10mm Ränder 7/13/12 1:32 PM Page 37