Fakir VIGOR PLUS - Troubleshooting Guide; Cannot Turn On Unit; General Troubleshooting Table

24
EN
• Has any electrical discharge wire been disconnected or broken? Please x it or contact the
distributor for additional purchase.
Cannot turn on the unit
Why is the unit not working even after turning it on?
• Has the plug been loosened or disconnected with the socket? Please check the plug?
Has the unit been properly reassembled after being cleaned? Please conrm. The unit will
not operate if the plasma dust collector or the front cover is not properly installed?
NOTE!
Before you call Customer Service, check whether you can correct the problem/ fault
yourself.
For this purpose, please see the “TROUBLESHOOTING” section. If you can not resolve
the problem/error, please call Customer Service. Before calling please make ready the
model name and product serial number. You can nd this information on the TYPE LABEL
of your product. Help Line: (+90 212) 444 0 241
Troubleshooting
Your appliance is processed via Quality Control against any malfunction.
Fault Possible Cause Solution
Appliance Does
Not Operate
Appliance is unplugged.
Appliance is not turned on
There's no power in the socket.
Power cord is damaged
Plug the appliance
Turn on the appliance
Try another outlet
Take appliance to be
repaired