Falltech Confined Space Davit System - Page 17

021519
MCS30 Rev B
17
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE SHEET SCALE
Label, Davit, Mast Height Label
412-01972
REVISIONS
REV DRAWN DATE
A PRELIMINARY INITIAL RELEASE
DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1 A A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel Andrade
N/A
N/A
N/A
Polycarbonate coated vinyl
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-11-17
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
95 mm
63.5mm
412-01972 Rev A
DO NOT REMOVE LABEL
MAST HEIGHT
21” 33” 45” 57”
This mast
is the
following
height.
412-01972 Rev A
DO NOT REMOVE LABEL
MAST HEIGHT
21” 33” 45” 57”
This mast
is the
following
height.
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE SHEET SCALE
Label, Davit, Model
Variable Information
412-01648
REVISIONS
REV DRAWN DATE
A PRELIMINARY INITIAL RELEASE
DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1 A A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel Andrade
N/A
N/A
N/A
Polycarbonate coated vinyl
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-12-2017
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
412-01648 Rev A
800.719.4619
Model#:
Date of Mfr:
Serial #:
Read User Instruction Manual Before Use.
DO NOT REMOVE LABEL
www.falltech.com
412-01648 Rev A
800.719.4619
Model#:
Date of Mfr:
Serial #:
Read User Instruction Manual Before Use.
DO NOT REMOVE LABEL
www.falltech.com
63.5mm
95mm
40mm x 10 mm cut out window
pantone solid coated colors
pantone black C
pantone 152C
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE
SHEET
SCALE
Label, Davit, Inspection Grid
412-01652
REVISIONS
REV
DRAWN
DATE
A
PRELIMINARY INITIAL RELEASE DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1
A
A
WEIGHT (FOR REFERENCE ONLY)
N/A N/A N/A Samuel Andrade
N/A N/A N/A Polycarbonate coated vinyl
APPLICABLE STANDARDS: ASME Y14.5-2009 & DIN ISO 2768 EXCEPTION: TRAILING ZEROS DENOTE TOLERANCE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS (mm) TOLERANCES ARE: 0 to 6 ........................................... 6 to 30 ......................................... 30 to 120 ..................................... 120 + ........................................... ANGLES .....................................
APPROVED MFG CHECKED
SURFACE ROUGHNESS SURFACE FINISH
9-11-17
MATERIAL
DRAWN
N/A N/A N/A
0.1 0.2 0.3 0.5
0.5
50.5 mm
95.25mm
DO NOT REMOVE LABEL
412-01652 Rev A
INSPECTION GRID
MARK ON DATE GRID
A) INITIAL SERVICE DATE
B) DATE OF PASSED INSPECTION.
IF UNIT FAILS INSPECTION REMOVE IT FROM SERVICE.
SEE USER INSTRUCTION MANUAL FOR INSPECTION GUIDELINES.
M J J
A S O N
D
J F M A
DO NOT REMOVE LABEL
412-01652 Rev A
INSPECTION GRID
MARK ON DATE GRID
A) INITIAL SERVICE DATE
B) DATE OF PASSED INSPECTION.
IF UNIT FAILS INSPECTION REMOVE IT FROM SERVICE.
SEE USER INSTRUCTION MANUAL FOR INSPECTION GUIDELINES.
M J J
A S O N
D
J F M A
Mast Extension Labels
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE SHEET SCALE
Label, Davit, Base Acceptable
Offset
412-01650
REVISIONS
REV DRAWN DATE
A PRELIMINARY INITIAL RELEASE
DESCRIPTION
912-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1 A A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel Andrade
N/A
N/A
N/A
Polycarbonate coated vinyl
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-11-17
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
63.5mm
95mm
412-01650 Rev A
DO NOT REMOVE LABEL
This base is to be used only with the
following davit offset lengths:
ACCEPTABLE OFFSET LENGTHS
412-01650 Rev A
DO NOT REMOVE LABEL
This base is to be used only with the
following davit offset lengths:
ACCEPTABLE OFFSET LENGTHS
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE SHEET SCALE
Label, Davit, Model
Variable Information
412-01648
REVISIONS
REV DRAWN DATE
A PRELIMINARY INITIAL RELEASE
DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1 A A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel Andrade
N/A
N/A
N/A
Polycarbonate coated vinyl
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-12-2017
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
412-01648 Rev A
800.719.4619
Model#:
Date of Mfr:
Serial #:
Read User Instruction Manual Before Use.
DO NOT REMOVE LABEL
www.falltech.com
412-01648 Rev A
800.719.4619
Model#:
Date of Mfr:
Serial #:
Read User Instruction Manual Before Use.
DO NOT REMOVE LABEL
www.falltech.com
63.5mm
95mm
40mm x 10 mm cut out window
pantone solid coated colors
pantone black C
pantone 152C
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE SHEET SCALE
Label, Davit, Generic Warning
412-01649
REVISIONS
REV DRAWN DATE
A PRELIMINARY INITIAL RELEASE
DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1 A A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel Andrade
N/A
N/A
N/A
Polycarbonate coated vinyl
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-11-17
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
63.5mm
95mm
412-01649 Rev A
All manufacturer’s instructions, labels, and warnings
must be read before use and followed at all times
for proper use, maintenance, and inspection. Failure
to follow instructions or misuse of this system may
result in serious injury or death. Inspect before each
use, following guidelines found in the user’s manual.
This device must be installed by a competent person
with the approval of a qualified person and operated
under the supervision of a competent person. This
component is rated for a maximum moment of
5,750 ft-lbs. Self-retracting devices or shock
absorbing lanyards must have AVERAGE
ARRESTING FORCE of 900 lbs. OR LESS, to
provide a 2:1 safety factor in all system configurations.
Exercise caution when using this device near
hazardous, thermal, electrical, or chemical sources.
Do not use if unsafe conditions are present. If this
product has been subjected to a fall event or fails
inspection, remove from service immediately. Always
log inspection results in the user’s manual and on
the inspection grid label.
DO NOT REMOVE LABEL
412-01649 Rev A
All manufacturer’s instructions, labels, and warnings
must be read before use and followed at all times
for proper use, maintenance, and inspection. Failure
to follow instructions or misuse of this system may
result in serious injury or death. Inspect before each
use, following guidelines found in the user’s manual.
This device must be installed by a competent person
with the approval of a qualified person and operated
under the supervision of a competent person. This
component is rated for a maximum moment of
5,750 ft-lbs. Self-retracting devices or shock
absorbing lanyards must have AVERAGE
ARRESTING FORCE of 900 lbs. OR LESS, to
provide a 2:1 safety factor in all system configurations.
Exercise caution when using this device near
hazardous, thermal, electrical, or chemical sources.
Do not use if unsafe conditions are present. If this
product has been subjected to a fall event or fails
inspection, remove from service immediately. Always
log inspection results in the user’s manual and on
the inspection grid label.
DO NOT REMOVE LABEL
pantone solid coated colors
pantone black C
pantone 152C
1 2 3 4 5 6 7 8
87654321
A
B
C
D
E
F
A
B
C
D
E
F
REV
TITLE
ITEM NO.
SIZE
SHEET
SCALE
Label, Davit, Inspection Grid
412-01652
REVISIONS
REV
DRAWN
DATE
A
PRELIMINARY INITIAL RELEASE DESCRIPTION
9-12-17 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1
A
A
WEIGHT (FOR REFERENCE ONLY)
N/A N/A N/A Samuel Andrade
N/A N/A N/A Polycarbonate coated vinyl
APPLICABLE STANDARDS: ASME Y14.5-2009 & DIN ISO 2768 EXCEPTION: TRAILING ZEROS DENOTE TOLERANCE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS (mm) TOLERANCES ARE: 0 to 6 ........................................... 6 to 30 ......................................... 30 to 120 ..................................... 120 + ........................................... ANGLES .....................................
APPROVED MFG CHECKED
SURFACE ROUGHNESS SURFACE FINISH
9-11-17
MATERIAL
DRAWN
N/A N/A N/A
0.1 0.2 0.3 0.5
0.5
50.5 mm
95.25mm
DO NOT REMOVE LABEL
412-01652 Rev A
INSPECTION GRID
MARK ON DATE GRID
A) INITIAL SERVICE DATE
B) DATE OF PASSED INSPECTION.
IF UNIT FAILS INSPECTION REMOVE IT FROM SERVICE.
SEE USER INSTRUCTION MANUAL FOR INSPECTION GUIDELINES.
M J J
A S O N
D
J F M A
DO NOT REMOVE LABEL
412-01652 Rev A
INSPECTION GRID
MARK ON DATE GRID
A) INITIAL SERVICE DATE
B) DATE OF PASSED INSPECTION.
IF UNIT FAILS INSPECTION REMOVE IT FROM SERVICE.
SEE USER INSTRUCTION MANUAL FOR INSPECTION GUIDELINES.
M J J
A S O N
D
J F M A
3pc Portable Base for 12” to 29” Oset Davit Arm