Need help?Do you have a question about the FALMEC Down Draft 90 and is the answer not in the manual?
General| Type | Downdraft |
|---|---|
| Width | 90 cm |
| Extraction Rate | 600 m³/h |
| Noise Level | 67 dB |
| Installation | Built-in |
| Material | Stainless Steel |
| Number of Speeds | 4 |
| Lighting | LED |
| Number of Motors | 1 |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Filters | Aluminum mesh |
| Control Type | Electronic |
| Grease Filter Type | Aluminium |
Checks for integrity and function before installation; aesthetic defects.
Electrical system compliance, earthed connection, mains supply check.
No connection to combustion fumes pipes; air discharge standards.
Read booklet carefully; manufacturer not liable for non-compliance.
Technical specifications are shown on labels located inside the hood.
Minimum distance from cooking equipment; no outdoor installation.
For qualified personnel; disconnect power before operations.
Turn on before cooking; leave on after for complete extraction.
Speed selection based on usage needs (air circulation, odours, vapours).
Metal filters every 30 hours; carbon filters every 3-4 months.
Overview of buttons, LEDs, and their functions.
Steps to pair radio control with hood pushbutton panel.
Procedure to create a new code for the radio control.
Advised cleaning frequency and methods for external surfaces.
Instructions for cleaning internal parts, avoiding liquids.
How to dispose of appliances in the EU according to WEEE directive.
Guidance for disposal in countries outside the EU.
To Next Page