EasyManua.ls Logo

FALMEC Move User Manual

FALMEC Move
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTIONS
BOOKLET
falmec.com
MADE IN VITTORIO VENETO (TV) - ITALY
EN INSTRUCTIONS BOOKLET
FR MODE D'EMPLOI
ES MANUAL DE INSTRUCCIONES
IT LIBRETTO ISTRUZIONI
Move
FDMOV24W5SB / FDMOV24W5SW
FDMOV36W5SB / FDMOV36W5SW
Question and Answer IconNeed help?

Do you have a question about the FALMEC Move and is the answer not in the manual?

FALMEC Move Specifications

General IconGeneral
Motor power215 W
Connected load280 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA+++ to D
Annual energy consumption67 kWh
Noise level62 dB
Pressure (Pa)500
Number of speeds4
Type of extraction-
Noise level (low speed)49 dB
Maximum extraction power800 m³/h
Noise level (medium speed)56 dB
Grease filtering efficiency classC
Minimum distance from electric hob520 mm
Removable filterYes
Number of filters4 pc(s)
Grease filter typeMetal
TypeBuilt-in
Product colorBlack
Exhaust connection diameter150 mm
Bulb power1.2 W
Number of bulbs3 bulb(s)
Package depth465 mm
Package width1295 mm
Package height410 mm
Package weight24100 g
Weight and Dimensions IconWeight and Dimensions
Depth277 mm
Width1161 mm
Weight20000 g
Height (max)696 mm
Height (min)336 mm
Height without chimney73 mm

Summary

Instructions Booklet

Attention: Protective Film Removal

Peeling Protective Film

Instructions on when and how to peel off the protective film from the sliding panel.

Cabinet Preparation for Installation

Cutting Cabinet Back Panel

Details on the dimensions required for cutting the cabinet back panel for installation.

Installation Details

Alternative Rear Outlet Configuration

Information regarding the alternative rear outlet configuration for the hood.

Key Installation Measurements

Key dimensions and measurements required for the proper installation of the hood.

Installation Procedure: Suspended Unit

Drilling and Fastening

Instructions for drilling the unit, fastening brackets, and inserting the hood.

Installation Procedure: Hood Securing

Hood Fastening and Motor Centering

Details on fastening the hood to the unit, motor chamber centring, and rear bracket insertion.

Vertical Outlet Installation

Check Valve and Suction Pipe Installation

Steps for installing the check valve, suction pipe, and electrical connection for vertical outlets.

Rear Outlet Installation

Air Movement and Check Valve

Instructions for output air movement and installation of the check valve for rear outlets.

Optional Carbon-Zeolite Filter

Filter Installation Procedure

Guide for installing the optional carbon-zeolite filter.

General Safety Instructions

Installer and User Safety Warnings

Technical, fume discharge, electrical safety for installers and general user warnings.

Product Information and Usage

Intended Use and Regulatory Warnings

Details on intended use, cleaning warnings, and California Proposition 65 warning.

Installation and Technical Features Overview

Overview of installation, technical features, positioning, electrical connection, and fume discharge.

Operation and Maintenance Guide

Hood Operation and Speed Selection

Guidance on when to turn on the hood, selecting speeds, and filter maintenance.

Control Panel and External Cleaning

Explanation of the electronic pushbutton panel and instructions for cleaning external surfaces.

Care, Lighting, and Disposal

Internal Cleaning and Filter Care

Instructions for cleaning internal surfaces, metal anti-grease, and carbon/zeolite filters.

LED Lighting and End-of-Life Disposal

Information on LED lighting replacement and proper disposal of the appliance.

Related product manuals