16
DEUTSCHENGLISH
Model Fame Looper
Input impedance 470K Ω
Output impedance 100K Ω
Current consumption 94 mA
Power supply DC 9V power supply (-) inside
Maximum recording time 10 minutes, unlimited overdubs
Weight 290 g
Dimensions 95 x 45 x 48 mm
Specifi cations:
Troubleshooting:
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
If the above troubleshooting has not been successful, please contact our service staff.
You can fi nd the contact details at www.musicstore.de.
Cleaning:
Regular cleaning of the device from dirt and dust increases the shelf life of the product.
Always disconnect the unit from the power supply while cleaning it. Optical lenses should
be cleaned with a dry microfi ber cloth. This also optimises the light output. Never clean the
device with water! Ventilation grilles and openings should always be free of dust and dirt.
Compressed air sprays are ideal for this application.
Symptoms Troubleshooting
No Function Check the correct power supply of the Looper.
No output
Check the cable connections from the instrument to the unit and
on to the amplifi er.
To Next Page
Loading...