g
2. Safety warnings
Do not touch any moving parts of the actuator!
Fancom takes no responsibility for any possible damage as a result of incorrect mounting and a non- or
partially functioning installation.
If a product is modified in any way, the right of guarantee and support from Fancom is forfeited.
The installation of the actuator and troubleshooting must be carried out by an authorized technician/installer,
according to the prevailing standards.
• Read the safety instructions carefully before installing and/or using the actuator.
• Mount the actuator in the installation before operating it.
• Regularly check that the actuator is functioning properly.
• After unpacking the actuator, check it for any possible transport damage. Any damage should be reported to
the distributor. Never install a damaged actuator!
To Next Page
Loading...
Need help?
General
