F&U MPF3573HU - Troubleshooting Common Issues

20
- You can press [fast forward]/[fast back] to move in the current recording.
Press [Stop] button to end the timeshift, and it will back to the normal playing of the program
Problem
Potential Reasons
What to do
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen shows
“No Signal”
DVB-T or DVB-T2 cable not
connected
Plug in the DVB-T or DVB-T2 cable
Aerial cable is faulty
Check aerial cable and connections
No sound from
speaker
No or incorrect connection
with audio cable
Connect the audio cable correctly
Sound on mute
Turn off mute function
Only sound, no image
on the screen
No or incorrect connection
with AV cable
Make sure cables are connected
correctly
The program is a radio
program
Press <TV/RADIO> key to shift into
TV mode
Remote Control is not
responding
The battery is exhausted
Change battery
Remote Control is not facing
or close enough to the Set
Top Box
Adjust the position of the Remote
Control and move closer to the unit
Picture is breaking up
The signal is too weak
Check aerial cable and connections
Troubleshooting