12
(c).Sort
[By Service Name] - Sort the channels in alphabe cal order.
[By Service ID] - Sort the channels according to the sta
on.
[By ONID] - Sort the channels according to ONID.
(d) LCN (Logical channel number)
Set LCN on or off (suggested as ON)
(2).Picture Se ng
To access the Menu, press MENU then select [Picture] using the RIGHT/LEFT key. The Menu
provides op
ons to adjust the video se ngs. Press UP/DOWN to select an op on and press
RIGHT/LEFT to adjust that se
ng. Press EXIT to exit the menu.
(a) Aspect Ra o
Change the aspect ra o of Video. [Auto], [16:9 PillarBox], [16:9 Pan&Scan], [4:3 Le erBox],
[4:3 Pan&Scan], [4:3 Full], [16:9 WideScreen]
(b) HDMI Resolu on
Set the correct video resolu on supported by the TV.
[480P]: for NTSC TV system.
[480i]: for NTSC TV system.
[576P]: for PAL TV system.
[576i]: for PAL TV system.
[720P]: for NTSC or PAL TV system.
[1080i]: for NTSC or
PAL TV system.
[1080P(50HZ)]: for NTSC or PAL TV system.
[1080P(60HZ)]: for NTSC system.
(c) TV Format
If the picture does not appear to be correct you can change this se ng.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
To Next Page
Loading...
