F&U MPF3575M - Troubleshooting Common Issues

20
- You can
press [fast forward]/[fast back] to move in the current recording.
Press [Stop] buon to end the meshi, and it will back to the normal playing of the program
Problem
Potenal Reasons
What to do
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen shows
“No Signal”
DVB-T or DVB-T2 cable not
connected
Plug in the DVB-T or DVB-T2 cable
Aerial cable is faulty Check aerial cable and connecons
No sound from
speaker
No or incorrect connecon
with audio cable
Connect the audio cable correctly
Sound on mute
Turn off mute funcon
Only sound, no image
on the screen
No or incorrect connecon
with AV cable
Make sure cables are connected
correctly
The program is a radio
program
Press <TV/RADIO> key to shi into
TV mode
Remote Control is not
responding
The baery is exhausted
Change baery
Remote Control is not facing
or close enough to the Set
Top Box
Adjust the posion of the Remote
Control and move closer to the unit
Picture is breaking up
The signal is too weak
Check aerial cable and connecons
Troubleshoong
When you are playing the program, you can insert the USB, and at any me you can press the [Time
shi] buon, the frame will be paused, and you may press the [PLAY] buon aer a second, it will start
to meshi now. Press [Info] key to see me shi informaon as below: