5. CLEANING, MAINTENANCE & STORAGE - CON
Fuel Nozzle
• Nozzles should be cleaned or replaced at least once per heating season.
• To clean dirt from nozzle, blow compressed air through nozzle. It may be
necessary to soak nozzle in clean diesel to help loosen any particles.
MAINTENANCE SCHEDULE
PART FREQUENCY
Fuel Tank Clean a minimum once a year
Fuel Nozzle Clean or replace once per season
Fuel Filter Clean or replace once per season
Photocell Clean or replace once per season
Ignition Device Clean or replace every 1000 hours of
operation
Fan Blades Clean as required
To Next Page
Loading...