Cold Water Rheology Instruction Manual
372144 Revision D, May 2012 6
2 Safety
Follow appropriate safety measures and wear proper personal protective equipment
(PPE), especially hand protection. Be aware of exposure to temperature extremes.
Please make sure that the power available matches the voltage labeled on the
circulating bath. Both the units will operate on either 50 or 60 hertz, but the voltage
must be correct- 110 to 120 VAC for the kit P/N 207952 and 220 to 240 VAC for
the kit P/N 207876.
Make sure that the bath is unplugged before filling or emptying.
This kit includes propylene glycol. Review its Material Safety Data Sheet (MSDS)
for appropriate clean up and disposal methods.
To Next Page
Loading...