Need help?Do you have a question about the FANOX SIL-G and is the answer not in the manual?
Handling precautions for relays to prevent damage during unpacking and installation.
Inspection procedures upon delivery to check for transport damage.
Procedures for handling sensitive electronic components to prevent ESD damage.
Requirements for qualified personnel and safety measures during installation and maintenance.
Visual representation of the relay's front panel layout and controls.
Physical dimensions of the relay unit and mounting requirements.
Schematics for connecting standard current transformers to the relay.
Various VT configurations for connecting voltage inputs to the relay.
Overview of the SIL-G relay's purpose and development context in the energy sector.
Detailed description of SIL-G capabilities, power supply options, and protection functions.
Block diagram illustrating the internal functions and interconnections of the SIL-G relay.
Guide to selecting and ordering specific SIL-G relay models based on features.
Configuration parameters for instantaneous phase overcurrent protection.
Settings for the Switch On To Fault protection function.
Parameters for inverse time directional phase overcurrent protection with curve selection.
Configuration for instantaneous phase undervoltage protection.
Settings for instantaneous positive sequence undervoltage protection.
Parameters for instantaneous line undervoltage protection.
Settings for directional overpower protection, including angle and activation levels.
Configuration for under and overfrequency protection functions.
Settings for Rate of Change of Frequency (ROCOF) protection.
Parameters for Out of Step (vector shift) protection.
Configuration for the automatic AC reclosing device, including attempts and timings.
Settings for synchronism check function to ensure voltage parameters match before closing.
Configuration for monitoring the integrity of the circuit breaker trip circuit.
List of electrical parameters measured by the relay, categorized by type.
Overview of the alarm panel functionality and how alarms are displayed and acknowledged.
Explanation of how relay states and events are logged and stored.
Detailed technical specifications and parameters for various protection functions.
Details of the USB port for local communication and its protocol.
Information on available remote communication ports and protocols.
Description of the front panel LCD screen and keypad for user interaction.
Overview of the SICom software for relay configuration and data management.
Instructions and link for installing the SICom software.
Guide to setting up user passwords and access levels for HMI and SICOM.
To Next Page
General
