This manual describes the assembly and care of two distinct furniture items from Fantastic Furniture: the Java Table D6 and the ELKE Chair 1 STR White.
Java Table D6
Function Description:
The Java Table D6 is a modern table designed for indoor use, featuring a glass top and a rattan frame insert. It is intended to serve as a functional surface, likely for dining or display, with a decorative element provided by the rattan. The design suggests a contemporary aesthetic, suitable for various home interiors.
Important Technical Specifications:
- Components:
- 1 x Top Panel (P1)
- 4 x Legs (P2)
- 1 x Glass Top (P3)
- Hardware:
- 4 x Felt Feet (H1)
- 8 x Bolts (H2)
- 8 x Flat Washers (H3)
- 8 x Spring Washers (H4)
- 1 x Allen Key (H5)
- Assembly Requirement: Two people are required for assembly.
- Glass Type: Designed to break into small, relatively harmless pieces and not sharp fragments.
Usage Features:
- Assembly: The table requires assembly by two people. The process involves attaching felt feet to the legs, then securing the legs to the top panel using bolts, spring washers, and flat washers, and finally positioning the glass top onto the rattan frame.
- Stability: Bolts should not be fully tightened until the item is fully assembled to allow for proper alignment. Once assembled, all fasteners should be periodically checked and re-tightened to maintain stability.
- Surface Protection: Felt feet (H1) are provided to protect floors and ensure stability.
Maintenance Features:
- Glass Care:
- Always handle glass with care to prevent scratches, chips, sudden temperature changes, and hairline fractures that can cause breakage.
- Avoid placing hot or cold items directly on the glass surface; use thick insulation materials like placemats or coasters.
- Do not drop objects on the glass or allow hard/pointed objects to come into contact with it.
- Never use the glass surface as a chopping surface.
- Do not sit or stand on the glass surface.
- Rattan Care:
- Rattan is a natural material that responds to environmental humidity.
- Low humidity may cause rattan to shrink.
- High humidity may cause rattan to absorb moisture, expand, and result in loose or wavy weaving. These are natural phenomena and not defects.
- General Maintenance: Periodically check and re-tighten all fasteners. Refer to the product care label or website for specific care instructions.
ELKE Chair 1 STR White
Function Description:
The ELKE Chair 1 STR White is a single-seater chair designed for seating one person at a time. It features a classic design with a backrest, seat cushion, and leg frames, intended for general indoor use.
Important Technical Specifications:
- Components:
- Back Rest (P1)
- Leg Frame (Left) (P2)
- Leg Frame (Right) (P3)
- Long Corner Block (P4)
- Short Corner Block (P5)
- Seat Cushion (P6)
- Cross Rail (P7)
- Hardware:
- 1 x Allen Key (H1)
- 4 x 60mm Bolt (H2)
- 2 x 50mm Bolt (H3)
- 8 x 35mm Bolt (H4)
- 4 x 25mm Bolt (H5)
- 14 x Spring Washer (H6)
- 14 x Flat Washer (H7)
- 1 x Long Screw (H8)
- 1 x Short Wood Bolt (H9)
- 4 x Wood Button (H10)
- Recommended Weight Capacity: 120 KG.
Usage Features:
- Assembly: The chair requires assembly, involving multiple steps to connect the leg frames, seat cushion, backrest, corner blocks, and cross rail using various bolts, washers, and screws. The Allen key (H1) is the primary tool.
- Stability: Bolts and screws should not be fully tightened until the final step (Step 8) to ensure proper alignment and prevent damage. Once fully assembled, all components should be secure and all hardware tight.
- Seating: Designed for seating one person at a time.
- Leveling: After assembly, the chair should be placed on a flat surface, and the seat pressed to level the legs before fully tightening all screws and bolts. Wood buttons (H10) are then pushed into the holes firmly.
Maintenance Features:
- General Maintenance:
- Periodically check and re-tighten all fasteners to ensure all components are secure and hardware is tight.
- Refer to the product care label or website for specific care instructions.
- Safety Precautions:
- Do not stand on or use the chair as a step ladder.
- Use only for seating one person at a time.
Assembly Checklist:
- Read instructions carefully before beginning.
- Ensure all required tools are available.
- Never use power tools unless specifically instructed, as they can damage components or hardware.
- Identify and lay out all components before assembly.
- Do not fully tighten screws until the item is fully assembled, unless instructed otherwise.
- Power Tools: Avoid using power tools unless instructed to prevent damage.
- Common Mistakes: Be aware of common mistakes such as using the wrong hardware or orienting components incorrectly.
- Soft Surface: Always assemble products on a soft surface (e.g., carpet or cardboard) to prevent scratching or damaging the product's surface.
- Bulky Items: Assemble bulky items in the room where they will be used, as they may not fit through doors once assembled.
- Glue: Do not use glue until certain that parts belong together.
- Fasteners: Periodically check and re-tighten all fasteners.
- Product Care: Check the product care label or website for product care instructions.
- Assistance: For difficulties, missing hardware, or components, visit the Fantastic Furniture website Help Centre.
- Safety/Weight Restrictions: Refer to page 2 of the respective manuals for safety requirements or weight restrictions.
Environmental Responsibility:
- Dispose of all packaging thoughtfully.
Customer Engagement:
- Customers are encouraged to share photos of their Fantastic Furniture products on Instagram for a chance to win a $250 gift card, using the handle @fantasticfurniture.
Need help?
General
To Next Page