GB-22
ENGLISH
wipe them regularly with a soft rag, soft brush, etc. and when
necessary, combined with some auxiliary tools (such as thin
sticks) to ensure no contaminant accumulation in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as
these may cause odors in the interior of the refrigerator.
Clean the bottle frame, shelves and drawers with a mild
detergent and dry with a soft cloth. Wipe the outer surface of
the refrigerator with a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes, abrasives,
such as toothpastes, organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage the fridge surface
and interior.
Boiling water and benzene may deform or damage plastic parts.
Do not rinse with water so as not to affect the electrical
insulation properties.
It is advisable to clean the appliance regularly and to remove
any food deposits or splashes; in particular, clean the door seals,
recesses and adjacent parts.
Don’t overlook parts of the appliance such as the humidity
controller, light casing, racks, egg and butter compartments, ice
cube tray, and all of the drainage areas, etc.
If the appliance is not kept clean and in good condition, its
surface could deteriorate and inexorably affect the length of its
service life, and could lead to a dangerous situation.
The appliance must not be steam cleaned.
Use only a non-abrasive sponge, rinse with clean water then dry
thoroughly before putting the parts back in place.
Never use abrasive cleaning products or hard metal scrapers to
clean the appliance, as they could scratch the surfaces and break
down the coating.
To Next Page
Loading...
