Filling with salt
1. Unscrew the cap from the salt container by
turning it anticlockwise.
2. Place the supplied funnel so the end ts into
the opening of the salt container. Load about
2kg of salt into the salt container.
NOTE:
1 °dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
°dH: German degree
°fH: French degree
°Clarke: British degree
/ No salt needed
– Set the selector to the – mark.
+ Set the selector to the + mark.
Mid Set the selector between the – and + marks.
WATER HARDNESS
Selector
position
Salt
consump-
tion
(gram/
cycle)
Auto-
nomy
(cycles/2
kg)
°dH °fH °Clarke mmol/l
0~10 0~17 0-12.5 0~1.7 / 0 /
10~25 17~44
12.5-
31.3
1.7-4.4 – 20 60
25~50 44~89
31.3-
62.5
4.4~8.9 Mid 40 40
>50 >89 >62.5 >8.9 + 60 25
saline solution will be immediately removed by
the water; the prolonged presence of salt water
inside the tank may lead to corrosion.
• If you plan to use dishwasher tablets for your
washing needs, then you do not require to
use salt or rinse agent but please note that
the rell salt indicator light will remain
illuminated on the control panel. is is quite
normal and will not affect the operation of
your dishwasher.
Adjusting the salt consumption
1. Unscrew the cap from the salt
container.
2. Turn the selector until the level
required corresponds with the marker
according to the following table.
GB-19GB-18
ENGLISHENGLISH
To Next Page
Loading...
