ENGLISH
GB-25
About the safety supply hose
e safety supply hose consists of the double
walls. e hose’s system guarantees its
intervention by blocking the ow of water in
case of the supply hose breaking and when the
air space between the supply hose itself and the
outer corrugated hose is full of water.
WARNING
A hose that attaches to a sink spray can
burst if it is installed on the same water line
as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected and
the hole plugged.
How to connect the safety supply hose
1. Pull the safety supply hoses completely out
from storage compartment located at rear of
dishwasher.
2. Tighter the screws of the safety supply hose
to the faucet with thread 3/4inch.
3. Turn water fully on before starting the
dishwasher.
To Next Page
Loading...
