ENGLISH
GB-30
Before Calling For Service
Reviewing the charts on the following pages may
save you from calling for service.
Problem Possible Causes What To Do
Dishwasher
doesn’t start
Fuse blown, or
the circuit break
tripped.
Replace fuse or reset
circuit breaker. Remove
any other appliances
sharing the same circuit
with the dishwasher.
Power supply is
not turned on.
Make sure the dishwasher
is turned on and the door
is closed securely. Make
sure the power cord is
properly plugged into the
wall socket.
TROUBLESHOOTING TIPS
Attention
After removing the work top, the screws must
be screwed again under the rear edge of the top
(b). e height will then be reduced to 815 mm,
as scheduled by the International Regulations
(ISO) and the dishwasher will t perfectly under
the kitchen working top.
To Next Page
Loading...
