GB-35GB-34
6. STARTING A WASHING PROGRAM
Wash Cycle Table
NOTE: ( ) Means: need to ll rinse into
the Rinse-Aid Dispenser.
Program Cycle
Selection
Informa-
tion
Description of
Cycle
De-
tergent
pre/main
Running
time(min)
Ener-
gy
(Kwh
Water
(L)
Rinse
Aid
Intensive For hea-
viest soiled
crockery,
and nor-
mally
soiled
pots, pans,
dishes etc.
with dried
on soiling.
Prewash
(50°C)
Wash (60°C)
Rinse
Rinse
Rinse (70°C)
Drying
5/22g
(Or3in1)
165 1.4 16.5
(*EN
50242)
is is
standard
pro-
gramme, it
is suitable
to clean
normally
soiled
tableware
and it is
the most
ecient
programme
in terms of
its combi-
ned energy
and water
consump-
tion for
that type of
tableware.
Prewash
Wash (45 °C)
Rinse(62°C)
Drying
5/22g
(Or3in1)
205 0.69 9
Program Cycle
Selection
Informa-
tion
Description of
Cycle
De-
tergent
pre/main
Running
time(min)
Ener-
gy
(Kwh
Water
(L)
Rinse
Aid
90 mins For nor-
mally
soiled
loads that
need quick
wash.
Wash (65°C)
Rinse
Rinse (65°C)
Drying
27g 90 1.15 11.5
Rapid A shorter
wash for
lightly
soiled loads
that do
not need
drying.
Wash (45 °C)
Rinse(50 °C)
Rinse (55 °C)
20g 30 0.7 10
NOTE:
*EN 50242: is program is the test cycle. e
information for comparability test in accordance with
EN 50242, as follows:
• pacity: 9 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• PI: 0.49W; P: 0.45W.
Left-on mode duration: Power will be cut o
automatically after program nished for 30 minutes.
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the
dishes and push them back.
To Next Page
Loading...
Need help?
General
