Why does my FAR TI60ST333/CH make a fan noise?
A fan is installed inside the FAR induction cooktop to remove heat caused by magnetic fields. This is normal, and the fan will stop automatically when the temperature inside the induction cooktop returns to normal.
What to do if my FAR TI60ST333/CH touch-sensitive keys do not respond?
If the lock mode is activated on your FAR Cooktop, the touch-sensitive keys will not respond. Refer to the 'Using' section of the manual for instructions on how the lock mode operates.
What to do if my FAR TI60ST333/CH induction cooking does not turn on?
First, ensure that your FAR induction cooktop is correctly connected to a power source. Then, verify that the power supply in your house is working properly.
What to do if my FAR TI60ST333/CH Cooktop went off suddenly emitting an alarm?
If your FAR Cooktop shuts off suddenly and emits an alarm, write down the error code displayed. Turn off the cooktop and check the meaning of the error code. Do not use the cooktop again until you identify and resolve the cause of the abnormality.
Why do pots and pans stay cold and the symbol 'U' flashes on my FAR TI60ST333/CH?
If pots and pans are not heating and the symbol 'U' is flashing, the FAR induction cooktop may not be detecting the cookware. This can happen if the cookware is not suitable for induction cooking, is too small, or is not centered correctly. Use pots and pans designed for induction cooking, ensure they are of adequate size, and center them on the cooking zone.
Why is my FAR TI60ST333/CH Cooktop surface scratched?
Surface scratches on your FAR Cooktop can be caused by: - Using cleaning products that are not suitable for induction cooking: Follow the cleaning instructions in the Maintenance and Cleaning section. - Using pots and pans with damaged bottoms: Use pots and pans with a flat bottom, as described in the Device Description section.
What to do if my FAR TI60ST333/CH touch-sensitive keys have difficulties responding to touch?
If the touch-sensitive keys on your FAR Cooktop are not responding well, it could be due to two reasons: - The ceramic surface is dirty: Clean the ceramic surface according to the Maintenance and Cleaning section. - Your finger is not in the right position: Follow the instructions in the Device Description section for proper touch technique.
Why do some pots and pans crack, sizzle, or make noise on my FAR TI60ST333/CH Cooktop?
This is normal for some pots and pans and is due to their manufacturing. It does not indicate a malfunction of the FAR induction cooktop.
Why does my FAR Cooktop cooking zone make a sizzle when the power level is high?
The sizzling sound from the cooking zone at high power levels is normal and doesn't indicate a problem with your FAR induction cooktop. The noise should diminish if you reduce the power level.
What does E1 / E2 mean on my FAR TI60ST333/CH?
E1 or E2 error codes indicate an abnormal power supply voltage. Check if the power supply is normal. Turn the device off and then on once the power is restored.
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 3 |
| Voltage | 220-240 V |
| Color | Black |
| Timer | Yes |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Frequency | 50/60 Hz |
| Control Type | Touch |
| Safety Features | Child Lock |
Critical safety warnings and precautions for appliance installation.
Step-by-step guide for cutting the countertop and ensuring ventilation.
Detailed instructions for making safe electrical connections to the appliance.
How the appliance automatically turns off if overheating is detected.
Detailed guide on setting and using the timer for cooking zones.
Guide to common error codes and how to interpret them.
To Next Page
